COSMETICS AND BATHROOM PRODUCTS:EYE SHADOW

EYE SHADOW

Ancient Egyptian women developed the art of decorating the eyes by applying dark green color to the lower lid and blackening the upper lid with kohl, a preparation composed of antimony and soot. Egyptians also used powdered charcoal, powdered galena, or soot alone to achieve the same eyelid-darkening effect. Semiprecious stones such as lapis lazuli and malachite were also ground and used as eye shadows. In addition, the Romans adopted the technique of using kohl to darken the eyelids. In the Middle Ages, the Crusaders found eyelid-coloring cosmetics widely used in the Middle East, and it was they who spread the use of these types of cosmetics throughout Europe. Elizabethan women used an iri- descent eye shadow made of ground mother of pearl. By the nineteenth century, research in France led to the development of more and better eye cosmetics at decreased cost.

Eye shadow is a cosmetic product applied to the eyelids for coloring. Modern eye shadow is mostly composed of a petroleum jelly base with fats (e.g., mineral oil or jojoba oil) and waxes (e.g., beeswax, lanolin, or ozokerite). It is colored with dyes that include ultramarine colors (organic polymers containing aluminum, oxygen, silicon, sodium, and sulfur) such as blue, pink, or violet, iron oxides of various shades, carbon black (a form of carbon resembling charcoal), carmine, bismuth oxychloride, manganese violet, chromium hydroxide greens, bronze powder, alumi- num powder, ferric ferrocyanide, ferric ammonium ferrocyanide, zinc oxide (ZnO), or titanium dioxide (TiO2). As titanium dioxide is a white opaque powder, it may serve as a base, allowing other included colored dyes to be viewed by muting the natural color of the skin. Eye shadow may also contain additional chemicals to enable a longer shelf-life and manufacturing consistency for the product, including talc, aloe, binders (e.g., octyl palmitate), and preservatives (e.g., parabens, imidazolidinyl urea, or BHA). A typical composition may be approximately 60 percent petroleum jelly, 10 percent fats and waxes, 6 percent lanolin (grease in sheep’s wool), and the remainder dyes, pigments, and preservatives. Un- fortunately, the addition of synthetic chemical preservatives is often the source of consumer allergic reactions, including contact dermatitis.

COMMON MATERIALS AND OF fiCE SUPPLY PRODUCTS:TI NTED WINDOWS.

TI NTED WINDOWS

As energy consumption continues to grow in the United States, companies are looking to make homes more energy efficient. It is estimated that 2 percent of all energy consumed can be attributed to the inefficiency of household windows. Improving window technology could save billions of dollars spent on heating, lighting, and cooling costs for consumers nationwide. The concept of adjustable darkness windows in households began with the development of photochromic materials. Photochromic materials darken upon exposure to light and block ultraviolet radiation from the sun, reducing the strain on your air conditioner in the summer. These materials have been used for some time in consumer eyewear but have not made the transition to window coatings. The main reason is that such windows respond to light only and are not manually controlled. During the winter, photochromic windows would also exclude desirable warming ultraviolet radiation. An adjustable window film that could be darkened or lightened depending on conditions would be ideal to reduce energy consumption regardless of the season. Liquid crystalline displays (LCDs), which are found in watches, computers, and a variety of other electronic devices, work by aligning their crystals to allow light to pass through. In the absence of an electrical current, the liquid crystals are randomly aligned and appear as dark spots that form the numbers and letters that we see on an LCD display. LCD-based windows are already found in homes and offices around the world. With a flick of the switch, they turn from transparent to dark. These materials are used primarily in user-controllable privacy windows. The drawback to LCD-based devices is the lack of control over the darkness of the window. This problem is addressed in a new technology called a suspended particle device, which allows a window to change from dark to clear by applying an external electrical current. These devices are a sandwich of two glass panes coated with conductive material that hold a liquid suspension of particles. The particles align themselves when an external current is applied to the conductive glass coating, allowing light to pass through the glass. When the current is removed, the suspended particles move back to a random orientation to block light and darken the glass. Varying the applied voltage produces different shades of darkness for the glass.

COMMON MATERIALS AND OF fiCE SUPPLY PRODUCTS:RUBBER CEMENT AND SPRAY PAINT.

RUBBER CEMENT

Rubber cement is commonly used as an adhesive that serves to bond two objects together with a degree of flexibility. In the early 1800s, a viscous mixture of natural rubber dispersed in benzene or gasoline was used to cement seams of garments to ensure that they would be watertight. This mixture was later used to completely waterproof wool and cotton garments. The ability of rubber cement to form a durable and flexible bond is the main reason it is chosen as an office adhesive product. Little has changed in the formulation of rubber cement from the 1800s. Because of the flammability and toxicity of benzene and gasoline, these solvents are no longer found in modern rubber cement formulations. Today, rubber cement is a mixture of natural or synthetic rubber dispersed in isopropyl alcohol and heptane. These solvents, although safer, should not be considered innocuous. Isopropanol may cause reproductive disorders, and heptane is extremely flammable. For these reasons, rubber cement should be used in a ventilated area and away from open flames. Inhalation may cause irritation to the nose, throat, and lungs. Ingestion is equally hazardous, causing burns to the esophagus and gastrointestinal tract.

SPRAY PAINT

The idea of delivering a controlled spray of liquid was developed in the early 1930s by Eric Rotheim. This delivery system is used for a number of applications in industry and in homes. The design of the spray can is very simple. The metal can contains a propellant, paint, and a nozzle for delivering the spray. You may have noticed that the bottom of a spray can has a concave shape. This is done to strengthen the can and allow pressure within the can to be distributed to the walls of the can. The propellant is a fluid or gas stored under pressure and expels the paint out of the can. The propellant is generally a substance that is a gas at room temper- ature and pressure. Under pressure, the propellant is liquefied and will remain liquid even though it is well above its boiling point. The other liquid, in this case liquid paint, is also stored in the sealed metal can. In the metal can container, a long plastic tube runs from the valve at the top of the can all the way to the bottom of the can. The curved shape of the bottom of the can ensures that no paint is wasted in the bottom of the can. The nozzle has a very fine opening that serves to break the liquid paint into small droplets, ensuring controlled coverage of the paint. When the valve on the nozzle is opened, the pressure within the can is reduced, allowing the liquefied propellant to form a gaseous layer at the top of the can. The pressure exerted by this gas layer forces the paint at the bottom of the can to travel up the plastic tube connected to the nozzle, where it is released as a fine spray. You may have noticed that spray cans instruct you to shake the can for several minutes before painting. A small plastic or metal ball inside the can mixes up the propellant and paint to ensure a uniform consistency of paint as it is expelled from the nozzle. Until the 1980s, most manufacturers used chlorofluorocarbons (CFCs) as propellants in spray cans. It has been concluded that the use of CFCs is harmful to the ozone layer, and CFC-based propellants were phased out. Today, the most popular alternative propellant is liquefied petroleum gas, which does not harm the ozone layer but must be used with care because of its extreme flammability.

COMMON MATERIALS AND OF fiCE SUPPLY PRODUCTS:RECYCLED PAPER AND RECYCLED PLASTIC.

RECYCLED PAPER

Recycled paper is paper that contains fiber from waste paper. The United States has more than 500 paper mills that currently use at least some recycled materials in production. Recycled paper is made by collecting large amounts of used paper and washing the paper to remove any ink that may be present. The paper is then literally beaten to a pulp by machines and bleached, most commonly with chlorine bleaches, to make the paper white. Once a uniform white pulp is obtained, the paper goes to a forming section, followed by a series of presses that remove the water from the pulp. The wet paper moves on to a drying stage, where the moisture content is reduced and the thickness is reduced by rolling through a number of steel rollers. It is estimated that for one ton of paper the recycling process saves over 7,000 gallons of water, 500 gallons of oil, and 600 pounds of air pollution! The practice of collecting paper for recycling is common today. The majority of recovered paper comes from businesses and industry, where the recovery rate approaches nearly 70 percent. Paper seems to be one of the most benign items with regard to human health. In the earlier years of paper recycling, a bleaching by-product called dioxin was found throughout the pulp and paper manufacturing process. Dioxin is one of the most toxic human-made chemicals known. Pulp and paper mills using chlorine-based methods of whitening create dioxin when the chlorine reacts with chemicals present in the wood and other fibers. It is interesting that chlorinated toilet paper contains the highest amounts of these harmful chemicals.

RECYCLED PLASTIC

Plastics are well known for their desirable properties of being lightweight, strong, and formed into a variety of shapes. In fact, modern plastics might just be too durable. Millions of tons of plastics are buried in land- fills and will never be broken down by nature. To address the environ- mental impact of this problem, a vigorous recycling program has been enacted to reuse plastics and minimize their effect on the environment. Plastics recycling has been a great success for polyethylene terephthalate, which is used in soda bottles, and high-density polyethylene, which is used in numerous applications from plumbing to computers. One of the biggest problems of plastics recycling is the great diversity of plastics that are collected. Certain polymers do not mix, bond, or adhere well to one another. A recycled product derived from mixed plastics can have inferior strength and durability. In cases in which plastics cannot be separated into recyclable material, they may be used as fuels in incinerators because of their large heat value. To ensure success in the recycling processes, the source materials must be relatively clean, homogeneous, and free of con- tamination. In the recycling process, homologous plastics are reduced in size to very small pieces that are heated, cleansed of impurities, and formed into small pellets. These small pellets are sold to manufacturers and can be reincorporated into a variety of products. Polystyrene coffee cups are recycled and commonly used as inexpensive stuffing for toys or beanbag chairs. Polyethylene soda bottle material may be used to make trash cans, flower pots, traffic cones, and plastic lumber. Mixed plastics that are not incinerated are used to produce extruded plastic lumber, shipping pallets, fencing, and park benches.

COMMON MATERIALS AND OF fiCE SUPPLY PRODUCTS:POLARIZED SUNGLASSES AND RECHAR GEABLE BA TTERIES.

POLARIZED SUNGLASSES

How light waves interact with matter has been studied at great length throughout centuries. Sunlight and other light sources transmit light as waves at perpendicular angles to the direction of travel. In 1669, a Danish mathematician, Erasmus Bartholinus, performed the first comprehensive experiments concerning the interaction of light with transparent calcite crystals, which is considered the first account of polarized light waves. In 1932, Edwin Land developed a synthetic film of quinine sul- fate and iodine embedded in nitrocellulose and trademarked the name Polaroid. This material had a very interesting property. It allowed only light waves that were cohesive, or traveling in the same direction, to pass through the lens. In practice, this reduced the ambient light reaching the eye by more than 50 percent, making the material ideal for sunglasses. It also significantly reduced sun glare from objects by allowing only a frac- tion of the glaring light to pass through the lenses. Today, polarized sun- glasses are made by stretching an amorphous polymer of polyvinyl alcohol that aligns the molecules and sandwiching this layer between sheets of transparent material such as glass. These sunglasses are used in a variety of activities, such as driving, skiing, boating, and playing sports. Polarized sunglasses help reduce glare and filter out a significant amount of light without distorting images.

RECHAR GEABLE BA TTERIES

Many consumers are familiar with rechargeable batteries that are common in many everyday devices, such as cellular phones, laptop computers, and digital cameras. These batteries are constructed very much like a normal dry cell or alkaline battery. Typically, they contain nickel, cobalt, zinc, or cadmium and an electrolyte of potassium, sodium, or lithium hydroxide. The most common rechargeable batteries are based on a nickel/cadmium design with a cadmium anode and a nickel oxide cath- ode. These batteries operate very much like other batteries with one major difference. When the chemical reaction has been completed and no electron gradient exists between the anode and the cathode, these batteries can be recharged by an external current that reverses the flow of electrons from the cathode to the anode. This reestablishes the electron gradient between the two ends of the battery and allows the battery to be reused after charging is complete. This process can be repeated as many as 1,000 times before the batteries lose their ability to be recharged. Rechargeable batteries are not as new as you might think. The most common rechargeable battery is the lead-acid battery, which has been found in automobiles for the better part of a century. Rechargeable bat- teries undergo a reversible reaction, providing electrons to power devices and being recharged by reversing the chemical reaction to pump electrons back into the battery. Rechargeable batteries may leak when recharged, and the contents are harmful if swallowed and cause burns from the caustic electrolyte materials. As such, it is important to be sure that bat- teries are never connected improperly, short circuited, or exposed to high temperatures.

COMMON MATERIALS AND OF fiCE SUPPLY PRODUCTS:PENCILS AND PENS

PENCILS

The origins of the modern pencil date back to the mid 1500s, when graphite was discovered in the Seathwaite Valley in England. Soon there- after, graphite was used as a writing instrument. The real breakthrough came when French chemist Nicholas Conte discovered a process of firing a mixture of clay and graphite in varying proportions to create writing instruments of different hardnesses. These kiln-fired mixtures were encased in wood, and the pencil was born. In the United States, William Monroe manufactured wooden pencils in the early 1800s. Mass production of pencils in the United States began during the Civil War, when machinery for the production of pencils began to make handmade pencils obsolete. The mass production of pencils led to other related advances, such as the rubber eraser, first patented by Hyman Lipman in Philadelphia, and the mechanical pencil sharpener. Pencils do not contain lead, as is commonly thought. Instead, graphite, a form of carbon, is used along with various binders to modify the hardness of the pencil.

PENS

The history of the ink pen dates back many centuries, to the days of writing with a quill and ink with a charcoal base. Modern pens are much different than the reed, quill, or fountain pen of centuries ago. These older designs had several significant drawbacks, such as the uneven flow of ink, the slow drying of the ink documents, and the laborious cleanup associated with keeping the pens in good writing condition. The first improvement was the switch to faster-drying ink. Quick-drying ink was already used to print newspapers, but it was not until a Hungarian journalist, Laszlo Biro, developed a pen that used fast-drying ink that pens became practical for consumers. Biro developed a pen that used a tiny metal ball rotating inside a metal tube to keep the ink in the pen from drying out and let the ink flow out at a controlled rate. These “ballpoint pens” were patented by Biro in 1943, with the patent eventually being acquired by the British government so that the pens could be used by Royal Air Force crews. Milton Reynolds produced the first commercial ballpoint pen in the United States in 1945, selling thousands of pens until the more inexpensive BIC ballpoint pens were introduced on the American market in the mid 1950s. The development of new inks for use in these pens was a laborious trial-and-error process. Inks using linseed, rosin, or wood oil are darkened with dyes to produce different colors. Carbon gives plant oil ink a black appearance, chromium produces green and orange colors, cadmium colors the ink red, and iron in the form of ferrous sulfate gives the widely used blue ink color.

COMMON MATERIALS AND OFfiCE SUPPLY PRODUCTS:ALKALINE BA TTERIES AND CORR ECTIONFLUID.

ALKALINE BA TTERIES

Alkaline batteries are common in electronic devices used in everyday life; however, the way in which they produce electricity is little understood. They are typically constructed with a high-surface-area zinc anode (the positive end) and a manganese dioxide cathode (the negative end). Inside the battery case is a potassium hydroxide electrolyte that is gelled with a cellulose derivative. This electrolyte allows electrons to flow from the anode to the cathode. When the circuit is completed, this flow of electrons powers the electronic device. Although there are many different types of batteries, the construction is typically the same. What varies from battery to battery is the composition of the anode, cathode, and electrolyte. Alkaline batteries were derived from the older “dry cell”-type batteries and were put into commercial production in the early 1950s. A battery is nothing more than a contained chemical reaction that creates an electron potential gradient. The zinc anode is oxidized to form zinc hydroxide-releasing electrons. The manganese dioxide at the cathode is reduced by electrons from the zinc, which are carried to the cathode through the electrolyte solution. Although this is the most common type of alkaline battery in use, some alkaline batteries use mercury and silver in their construction. These metals, especially mercury, can be highly toxic and can be problematic to dispose of properly. Batteries may rupture when exposed to excess heat that accelerates the chemical reaction. This may release harmful flammable or corrosive materials that can result in serious chemical burns and skin irritation.

CORR ECTIONFLUID

The invention of White Out and other correction fluids was spawned by the need of Edwin Johanknecht for a correction fluid that worked on photostatic paper. In 1971, Johanknecht and his partners incorporated their new business, White-Out Products, Inc., providing correction fluid to users all over the world. Correction fluids usually contain a proprietary mixture of solvents and whiteners that act much like a thin fast- drying paint. Typically, methyl chloroform (1,1,1-trichloroethane) is used as a fast-drying solvent in which pigments such as titanium dioxide and other colorants are suspended. Correction fluid is brushed across the paper to cover mistakes and once dry can be written or typed over. Although the product is marketed for consumer use, there are a number of hazards associated with it. Inhalation of large amounts of solvent vapor may cause unconsciousness and may irritate the mucus membranes of susceptible individuals. It can also have a long-term effect on the central nervous system and cause abnormal heartbeats in humans. The dried correction fluid can be especially hazardous if burned, releasing small amounts of phosgene, hydrogen chloride, and chlorine. The formula will react with strong bases and oxidizing agents as well as reactive metals. For these reasons, it is important that correction fluid be used according to the manufacturer’s instructions.